Buzzrack e-Scorpion 1 Platform Tow Ball Bike Rack

The E-Scorpion 1 is a hugely versatile rack that can take a large range of different types of bikes. Whatever bike you have now (or in the future) the E-Scorpion 1 should be able to accommodate it.

What’s the big deal about the Buzz E-Scorpion? Fundamentally it’s down to design, safety, quality, and ease of use – passes the highest safety standards. Consider the following:

• It fits 2″ hitch receiver and locks with a locking anti-wobble bolt
• You mount it to the hitch receiver still folded, this gives you loads of space to fit it to the car (no bashing shins or straining your back).
• It sits high on the receiver, well clear of speed bumps and other hazards such as steep ferry ramps.
• The wheel holders will accommodate larger wheelbases; up to 129.5cm.
• Ratchet straps allow a quick and secure attachment of the wheels, long straps can accommodate tires up to 4” wide.
• Lockable frame arms hold your bike securely and can be attached to any part of the frame, or the seat post.
• The upright can be raised so it’s suitable for bikes with very large frames.
• It tilts to allow access to the boot, even with the bikes fitted. It is genuinely easy to tilt and well balanced during the tilting phase.
  
• It folds so you can easily store it in your boot when required, making finding a parking space before your ride much easier. It’s even small enough to fit it in the back of the car if your boot is full.
• A built-in transport wheel makes it as easy as possible to get the rack to and from your car. You won’t even need to lift the rack until you put it on the hitch receiver. Because it folds it’s much easier to maneuver.
• All parts are replaceable if e.g. someone forgets that a rear carrier is fitted and reverses into a wall – which happens!
• 2 different loading ramps are available separately.
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. All tools you might need are provided.
• We also think it looks great!
  

Technical Specifications

Max number of bikes: 1
Max weight per bike: 30kg
Max load capacity: 30kg
Max tire size: 4″
Fits 50mm ISO tow ball: yes
Dimensions (width x depth): 134 x 57 cm
(measured from the centre of the tow ball mount to the outside edge of the number plate holder).
Weight: 13.5kg
Tilting: yes
Integrated lighting board: yes
Lighting board plug type: 7 pin
Bike carrier to tow ball lock: yes
Bike carrier to bike lock: yes

The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
Requires 65mm clearance from center of tow ball to rear of vehicle. NOT TO BE USED ON MOTORHOMES, CARAVANS OR TRAILERS

E-Bike Compatible