Your cart is currently empty.
Buzzrack Eazzy 4 Platform Tow Ball Bike Rack
or buy now, pay later with
- SHOP NOW
- ENJOY NOW
- PAY LATER
Pay it in 4 | Interest-Free
At checkout, select Afterpay
as payment method
Use your existing payment card
Simply complete your
No long forms, instant
Pay over 4 payments
Pay every 2 weeks, enjoy
your purchase right away
FIND IN STORE
Check stock in store and select click & collect at the cart.
The BUZZRACK Eazzy 4 is a really well designed, well engineered piece of kit; smart, sophisticated and very good value for money.
Easy! The Eazzy 4 is very easy to fold which makes for easy lifting, easy carrying, easy fitting, easy storage in the car boot when you are out for a ride.
Folds to store in the car: this is really useful, because damage to tow bar carriers in car parks from other vehicles can be an issue. A tow bar carrier will almost certainly make your car much too long for a standard car parking space.
More detail about folding: because the support trays fold into the bike holder uprights (there are straps to hold them closed) the Eazzy 4 is easy to carry around, easy to fit and remove, and easy to store. The metal parts are steel, not aluminium, and it weighs almost 20kg, but because it’s a vertical 2-handed lift it feels much lighter than this, and there should be no strain on your back when moving it and fitting it. Most 4 bike wheel support racks are relatively very awkward and hard work to handle compared to the Eazzy 4.
Key features of the Eazzy 4
Assembly: The Eazzy 4 is supplied fully assembled, except for the lights which are attached with only 1 screw each side (which makes these lights particularly easy to replace if damaged), and there’s 1 bolt for the number plate holder – all fittings and a tool are supplied.
Fitting to the car: You fit the Eazzy 4 in its folded state, which leaves you with all the space you need to work on the tow ball fitting system. When you first place it on the tow ball it supports itself – you can let go of it and it won’t fall to the ground. You’ll then take the weight again, spin the tightening wheel until it’s tight, and lock it. BUZZRACK’s carriers comply with the very exacting standard XPR-18-904-4 and therefore include an anti-sway tensioner; this has an integrated handle and 2 or 3 turns are usually sufficient. The video below shows the fitting and the bike installation.
Lighting system: The Eazzy 4 comes with a 13 pin lighting system, including a reversing light. 13 pin to 7 pin adapter is not included.
Tilting: Tilting is easy, and is very well balanced even with a full load. The Eazzy 4 sits quite high on the tow ball, and the tilt function is optimised to prevent the lights from hitting the road surface, while still using the weight of the bikes to help bring the bike platform back to the level again in a controlled way. But this geometry doesn’t allow for tall vertical tailgates to be opened – e.g. VW Transporter T5 and T6.
- The wheel holders will accommodate all wheelbases, even small children’s bikes
- The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen
- The Eazzy 4 is entirely suitable for carbon frame bikes; the rubber-padded bike frame cradles rotate 360 degrees and, again using rubber-padded straps, they hold any type of tube firmly but gently.
- The maximum permitted load is 60kg, with no bike weighing more than 20kg
- Electric bikes up to 20kg may be carried, although the Eazzy series is not optimised for e-bikes (see E-Scorpion for e-bikes); the down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car
- There is a built in locking cable to secure your bikes; as usual with cable locks, it’s a deterrent only.
Other features and basic specifications
- The patented conical fitting fits to all tow balls, even to the bolt-on tow balls we see occasionally that do not meet standards for neck length or ball diameter.
- A reminder that it locks to the tow ball.
- The Eazzy 4 sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.
- Dimensions: 112cm wide x 94cm deep (measured from the centre of the tow ball to the outside edge of the number plate holder). 24cm wide when folded.
- Weight: 19.8kg
- The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided.
- All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!
Free Delivery on all orders over $99 (excl. Super73). Orders under $99, a flat rate delivery charge of $8.50 applies.
All orders are dispatched with 24 business hours from our Gold Coast Showroom.
Delivery times will vary from 2-5 business days for metro areas and 7-14 business days for rural and remote areas.
Returns & Refunds
Crooze is committed to 100% customer satisfaction, our 30-day returns policy is simple and You are always welcome to return any unused merchandise in its original condition within 30 days from purchase for an exchange, credit, or a full refund (shipping and Merchant fees excluded).
All you need to do is return your items to us, in original condition, for an exchange, store credit or refund.
The Eazzy 4 sits quite high on the tow ball, and the tilt function is optimised to prevent the lights from hitting the road surface, while still using the weight of the bikes to help bring the bike platform back to the level again in a controlled way.
The wheel holders will accommodate all wheelbases, even small children’s bikes
You fit the Eazzy 4 in its folded state, which leaves you with all the space you need to work on the tow ball fitting system.
|Frame Solidly built of steel and high impact resistant plastic materials.||Max Number of Bikes 4|
|Dimensions (width x depth) 113 x 92 cm||Weight 19.8kg|
|Max tire size 3.25"||Max bike frame down tube size diameter 75mm (3")|
|Fits 50mm ISO tow ball Yes||Fits swan neck / detachable tow ball Yes|
|Max Load Capacity 60kg||Max Weight Per Bike 20kg|
|Integrated lighting board Yes||Lighting board plug type 13 pin|
|Bike carrier to tow ball lock Yes||Bike carrier to bike lock Yes|
*Care is taken when providing product specifications. Occasionally, without notice manufactures may alter product design or specifications.