Juice Lubes Tyre Juice Sealant 140ml

Engineered for elite downhill racing, Juice Lubes Tyre Juice Sealant delivers proven puncture protection through an advanced sealing technology that neutralises thorns, sharp rocks, and pinch-flat hazards. This competition-grade formula creates a resilient barrier inside your tyre, enabling you to confidently reduce pressure for enhanced traction, improved ride comfort, and accelerated cornering speeds. Simply pour into your tubeless setup and experience the reliability trusted by World Cup athletes.

Juice Lubes Tyre Juice Sealant features a proprietary synthetic latex formulation that reliably seals punctures up to 7mm without the common drawbacks of traditional sealants. Installation is straightforward, and the ammonia-free, non-corrosive composition safeguards your wheels and tyres while eliminating allergic reaction risks. Unlike inferior alternatives, this formula resists clumping and maintains consistent performance throughout the riding season, delivering dependable protection with minimal maintenance hassle.

This versatile sealant performs across mountain bikes, road, gravel, and hybrid setups, operating reliably between 15-80 psi and -20°C to +50°C. The water-soluble formula simplifies cleanup and maintenance, with typical durability spanning 6-9 months before requiring top-ups. CO2-compatible and valve-installable with the core removed, Juice Lubes Tyre Juice Sealant integrates seamlessly into your existing tubeless system without specialised equipment or complicated procedures.

KEY FEATURES

• Suitable for Downhill/Enduro/Road/Gravel/MTB
• Contains fibre particles to help fill large holes and tears
• Ammonia-free synthetic latex
• Lasts up to 9 months
• Seals up to 7mm holes
• Seals porous tyres and bead/rim gaps
• Operating pressures 15-120psi
• CO2 Compatible
• Water washable
• Compatible with tubeless-ready and full UST wheels/tyres
• Non-corrosive formula
• No latex so no latex allergy problems
• Environmentally safe

Note: Not to be mixed with natural latex sealants

Step By Step

• STEP 1 : Get Set. Start with fresh tubeless rim tape and valves.Give your tyre a check for any damage and do your best to start with good quality kit that's damage-free.Check your Tyre Juice packaging to work out the correct quantity for your bike. Bikes with inserts will need a little more than recommended.
• STEP 2 : Seal It Up. For pouches: Remove your valve core and push the pouch nozzle over the valve. Give it a squeeze and add sealant directly through the valve and into your tyre.For bottles: Either insert through the valve or pour straight into your tyre before seating the bead.Tyre Juice can also be painted onto tyre beads for a perfect, airtight fit.
• STEP 3 : Inflate and Go. Once seated and inflated give your wheel a shake and a good spin to get the Tyre Juice spread around inside your wheel. Give everything a good clean to wipe up any spills, keeping it all away from your clothes.Pop it back on your bike and shred like the true savage you always knew you were. Crush your mates and hear the lamentations of their tubes