Quarq Tyrewiz 2.0 Valve Stem Pack

*Includes two (2) valve stems 

Tyre Pressure Sensor

The TyreWiz 2.0 Tyre Pressure Sensor Can be installed in almost any tubeless wheel setup, making it a very versatile tool for measuring your tyre pressure. The Valve Stem pack is the required accompaniment of the TyreWiz 2.0 in a non-Sram HiTop wheelset. The pack comes in a variety of lengths to suit all types of tubeless rims.

Choosing the Correct Length Valve Stem

We recommend watching the QUARQ TyreWiz 2.0 Installation Video within our image gallery to get a good idea of how to measure up your rim for a TyreWiz 2.0. You can do this with the included tool with TyreWiz, or with a simple cable/zip tie technique at home before you order your TyreWiz and Valve stems to suit. The simplified process is also below:

1. Get a cable/zip tie
2. With your tyre off the rim, insert the cable tie through the valve whole in the rim
3. Make sure the fastener end of the cable tie is against the inside of the rim
4. Mark on the outside of the rim, on the cable tie, where it exits the valve hole
5. Remove the cable tie
6. Measure from the fastener end of the cable tie to your new marking, this is the length of valve you need to suit