Fox Factory DHX NEO Live Valve Coil Shock

**Please note - all coil shocks do not come with a coil which are sold separately.

Unequaled Wireless Suspension Control

Only when paired with the NEO Live Valve Sensor kit, your ride quality and response is nearly limitless. The speed of Neo means that the time from when your tyre hits a bump, to the Live Valve Neo Controller opening your shock, is a mere 1/70th of a second. The only thing worse than bad suspension is unpredictable suspension. Your shock shouldn’t have to rely on extensive or historical power input data to predict how you’re riding. Once installed and set up, it should act exactly the way you want, when you want, with no noticeable lag

What is Neo?

Riders are seeking faster actuation of their dropper posts with minimal force to the lever, allowing them to micro-adjust saddle height as needed on any terrain. To make Transfer Neo’s actuation feel instantaneous, we needed a signal to reach the dropper at a speed faster than any wireless protocol that was already in-market. For this reason, we made Neo. Like a Formula 1 race car, Neo has all the non-essential functions of its wireless protocol stripped away in favor of speed.

Live Valve Technology

Live Valve Neo does not employ a third “Pedal” mode, which some riders may perceive as necessary when climbing technical trails, or pedaling through low angle technical sections. Live Valve Neo can switch between Open and Firm so fast that a “middle ground” setting is not necessary. You get full support of Firm mode exactly when you need it, and the plushness of Open mode exactly when you want it. Three elements work together to achieve Live Valve Neo’s speed advantage:

1. Sensors only transmit the info they need to I.e. when the shock needs to open.
2. Neo communicates a command from the sensors to the controller in as little as one millisecond.
3. A 2-position magnetic latching solenoid opens or firms the shock’s compression circuit significantly faster than a motor, while remaining virtually silent

Intuitive Sensors

Both the Fork and Rear Sensors read terrain 400 times per second with incredible accuracy. Their un-sprung locations near each wheel axle mean no trail feature is missed. They collect a large amount of data but will only send a signal to the Controller when you need your shock to open. The sensors transmit imperceptibly fast, and the widely available CR2032 coin cell batteries will last as long as one year. What separates Live Valve Neo from other electronic suspension systems? It’s how it helps you ride faster in every situation, whether climbing, traversing or descending.When commanded by the sensors, the shock will switch between two positions—Open and Firm—in as little as 1/70th of a second.

Fork Sensor

The F Fork Sensor is mounted to the front brake caliper. Using a built-in accelerometer, it determines both the angle of the terrain you are riding, and the bump force experienced by the front tyre.

Rear Sensor

The R Rear Sensor is mounted to the rear brake caliper. It determines the bump force experienced by the rear tyre but does not measure terrain angle, since that is already determined by the Fork Sensor.

Controller

The C Controller is built into the rear shock, and will Open or Firm the shock’s
compression circuit based on trail data from the sensors. The controller is powered by a single rechargeable battery – the same battery and charger that are used with the Transfer Neo dropper post.

Fox Bike App

The A FOX Bike app guides users through system setup with helpful tutorials, displays battery level, monitors firmware updates and reports diagnostics. Riders who want to customize suspension performance to their preference can do so via the app with Live Valve Neo Tunes.

What's Included:

• DHX Live Valve Neo shock
• FOX Battery Block
• Owner’s manual

What else is needed:

• NEO Live Valve Sensor kit